A blinking red light on your Cliq e-cigarette battery is an indication that there is an issue that needs attention. The red blinking light is a warning sign and should not be ignored, as it could lead to further problems if not addressed. In this article, we will explore the common reasons why your Cliq battery may be blinking red and provide troubleshooting tips to help resolve the issue.
Low Battery
The most common reason for a blinking red light on your Cliq battery is a low battery level. When the battery charge drops below a certain threshold, the light will start flashing red to alert you that the battery needs to be recharged soon. If you continue vaping on a low battery, it could trigger the battery safety protection feature which disables the battery until it is recharged.
Try recharging your Cliq battery fully to see if that resolves the blinking red light issue. Use the USB charging cable that came with your Cliq kit and plug it into a wall adapter or computer USB port. It usually takes 1-2 hours to fully recharge the battery from empty to 100%. If the light still blinks after a full recharge, then the issue is likely something other than a low battery.
Faulty Connection
Another common reason for a blinking red light is a faulty connection between the battery and the cartomizer (the section that holds the e-liquid). This connection allows power to be delivered from the battery to heat up the atomizer coil and produce vapor. If this connection is interrupted, it can cause the red light to blink.
First, check that the cartomizer is fully screwed into the battery. You want to ensure there are no gaps and that it is securely attached. Also inspect the connector pins on the battery and inside the cartomizer to make sure they are clean and not bent or damaged. The pins need to make smooth contact for power to be transferred.
You can also try swapping the cartomizer with a new one to see if that fixes the blinking light issue. Over time, the heating coil inside the cartomizer can wear out or get gummed up with e-liquid residue. Replacing the cartomizer with a fresh one can often resolve any electrical connection issues.
Defective Battery
In some cases, the blinking red light may indicate an issue with the battery itself rather than just a low charge level. Cliq batteries can malfunction over time, especially if they have been dropped, gotten wet, or used improperly. The light will blink if there is a fault with the battery electronics or wiring.
If you’ve ruled out the other common causes, then a defective battery is likely the culprit. Some troubleshooting steps you can try include:
- Inspect battery for any signs of damage like dents, cracks, or corrosion.
- Check that all wires and solder connections are intact inside the battery.
- Try a different Cliq battery if available to test if issue persists.
- Reset the battery by pressing the button 5 times quickly to restart.
If the blinking red light persists after trying the above steps, then the battery will likely need to be replaced. Cliq batteries are not designed to be user serviceable, so you will need to contact the manufacturer for warranty support or purchase a new battery.
Using Wrong Charger
Another potential cause for a blinking red battery light is using the wrong charger. The Cliq batteries are designed specifically to work with the USB charger included in the starter kit. Using a charger with incorrect voltage or amperage for the Cliq battery could trigger the blinking light warning.
Be sure to use only the factory Cliq USB charging cable and power adapter to recharge your batteries. Do not use a different brand of vape charger, higher voltage adapters like laptop or phone chargers, wireless chargers, or car USB adapters which may overload the Cliq battery.
If you have used an improper charger, stop immediately and switch back to the correct Cliq USB charger. The battery may recover, but if the light continues blinking even with the proper charger, the battery may have already been damaged and need replacing.
Cold Weather Use
Using your Cliq device in very cold weather conditions can also potentially cause the battery to blink red. The chemical reactions within the battery slow down significantly when cold, which can interrupt the power delivery. Taking a puff on the vape when the battery itself is below room temperature could trigger the red light warning.
To avoid cold weather issues, try keeping your Cliq device in an inner jacket pocket when outside in cold temperatures. Do not leave your vape or spare batteries in a car during freezing weather. Let the battery warm back up to room temperature before attempting to use it again. The red light should stop blinking once the battery interior warms up again.
Short Circuit
Rarely, a short circuit in the battery can cause the red light issue. This may happen if the battery gets wet or damaged in a way that causes internal wires to touch. Metal objects like keys or coins could also short the battery if carried together in a pocket or bag.
Inspect your battery closely for any signs of water damage or dents/cracks that may indicate a short. If the red light persists, stop using the battery immediately and replace it, as shorts can lead to overheating. Carry and store your Cliq batteries carefully away from metal objects to prevent shorts.
Troubleshooting Tips
Here are some general tips for troubleshooting a Cliq battery that blinks red:
- Recharge the battery fully with the correct Cliq USB charger
- Check all connections are secure and clean
- Try different cartomizers in case one is faulty
- Test with different Cliq batteries if available
- Reset battery by pressing fire button 5 times rapidly
- Avoid exposing battery to freezing temperatures
- Inspect closely for any damage or signs of short circuit
- Contact Cliq support if issue persists after troubleshooting
When to Replace the Battery
If the blinking red light on your Cliq battery persists after trying the troubleshooting steps, it likely means the battery itself is defective and needs to be replaced. Contact Cliq support to see if the issue may be covered under warranty. If not, you will need to purchase a new Cliq battery.
Some signs that indicate it’s time to replace your Cliq battery include:
- Red light blinks even after full recharge and with a new cartomizer
- Noticeable decrease in battery life over time
- Dents, cracks, corrosion or other damage to battery casing
- Overheating, strange smells or noises from battery
- Battery feels very hot after charging or use
Li-ion batteries have a limited lifespan and will need to be replaced every 6-12 months with regular use. Buying an extra battery or two can help ensure you have a charged spare handy when one needs replacing.
Summary of Causes
Here is a quick summary of the main reasons your Cliq battery may blink red and tips to resolve the issue:
| Cause | Solution |
|---|---|
| Low battery charge | Fully recharge battery with Cliq USB charger |
| Faulty cartomizer connection | Check connections are secure, clean pins, replace cartomizer |
| Defective battery | Inspect for damage, check wires, contact support, replace battery |
| Wrong charger | Use only official Cliq USB charging cable and adapter |
| Cold weather use | Keep battery warm, allow to return to room temperature |
| Short circuit | Inspect for damage or exposure to water/metal, replace battery |
Conclusion
A blinking red light on your Cliq battery is a sign that something needs attention. The most common causes are low charge, faulty cartomizer connection, defective battery, wrong charger, cold exposure, or short circuit. Carefully inspect your battery and connections, recharge fully, replace components if needed, and avoid improper chargers or extreme cold. Contact Cliq support if the issue persists after troubleshooting. With proper care and maintenance, your Cliq battery should provide many months of reliable service before needing replacement.